Salt Creek meta-data

Southern San Andreas Fault

33.4485 N 115.8437 W

DCSE J2781 transducer, -6.591 mm/V

Length 10 m

Obliquity uncertain (>30°)

Stainless steel wire held in tension by Caltech c. 1970 beam-balance with LVDT body affixed to 3 mm wire.

Range 25 mm,

Resolution 10 µm.

Telemetry: Solarstream Satellite link

The distance between Ferrum and Salt Creek is 1.37 km, and between Salt Creek and Durmid is 5.58 km, a total span of 6.95 km.

The 0.35 mm slip event below was triggered by a nearby M≈7 Gulf of California earthquake

 

Salt Creek, creepmeter, Durmid Hill, coSC

For In the period 2005-2009 the creep rate has been less than 1 mm/yr interrupted by creep-events and triggered slip with amplitudes less than 1 mm. The uncertain obliquity of this site requires the displacements measured to be multiplied by 1.15-1.3. The early data depicted below have been corrected for temperature by subtracting 6.7*degC from the raw displacements: a mechanical shift in the placement of the temperature sensor required this correction factor to be adjusted in correcting the later data.

Numerical data

A four column zipped Excel file of raw data from Salt Creek may be downloaded, and a zipped .csv file may be downloaded here. The date format is local time MM/DD/YY hh:mm:ss, in the first column, dextral slip in mm in the second column, subsurface temperature in degreesC in the third column. Time in this file is GMT.

The data corrected for temperature as shown in the above jpg or pdf may be downloaded as a zipped .csv file here. Times in GMT at variable data intervals.